TiLite Aero X

Aero X Innovation

The Tru-Fit System opens up the world of adjustability by incorporating an infinite adjustment mechanism. The Tru-Fit system allows you to fine tune the fit of your chair because you are not limited to a series of pre-set holes. Also, instead of bolting through frame-weakening holes, components clamp directly onto the frame. This eliminates one of the main stress points on today's wheelchairs by reducing the number of holes in the frame.

TiLite's Curved Axle Plate allows for the greatest range in center of gravity adjustment and rear seat height adjustment.

Snap-In Seat Saddles lock the cross tubes in place on TiLite’s rigid folding mechanism. This feature helps the Aero X achieve rigid chair performance.

The Aero X utilizes Machined Plugs to create rear wheel camber. In contrast to using washers to create rear wheel camber, the use of machined camber plugs precisely aligns the Aero X’s rear wheels, allowing the chair to consistently track straight.

TiShaft Back Release Bar makes folding and unfolding the backrest easy from any angle.

Aero X Options

Titanium Frame Upgrade to get the benefits of titanium frames: Lighter weight, higher strength, and less vibration.

Performance 5-Spoke Soft Roll Wheel weighs just 1.6 ounces.

TiLite is proud to offer an Armed Forces Edition of the Aero X. There are not enough words to express TiLite’s appreciation for our veterans’ service and dedication.

Aero X Specifications

Frame Type* Folding
Frame Style* Box Frame
Frame Material* Aluminum
(Titanium Upgrade Available)
TiFit* N/A
Adjustability* Full Adjustability
Growable* Optional (Depth Adjustable Back/Frame)
Custom Configuration* YES
Frame Options Fixed Front End
Swing Away (All-In-One Swing In, Swing Out & Removable)
-- Hemi Height Frame
Armed Forces Edition
Power Adaptable Frame
Reinforced Frame
Heavy Duty Edition
Transport Weight** Fixed Front - 16.0 lbs.
Swing Away - 18.4 lbs.
Chair Width Calculate Width
Seat Width 12" - 22"
Seat Depth 12" - 20"
Front Seat Height 13.5" - 22"
Rear Seat Height 13" - 20"
Camber 0°, 2°, 4°, 6° or 8°
Front Frame Angle Fixed Front - 70°, 80° or 85°
Swing Away - 70°, 80°, 85° or 90°
Footrest Width Options Standard Taper
Seat Back Type Folding Seat Back
Adj. Height 11" - 20.5"
Adj. Angle 80° - 101°

Fixed Seat Back
Adj. Height 11" - 20"
Center of Gravity Adjustment 6"
Weight Limit Standard - 250 lbs.
Heavy Duty Edition - 350 lbs.
Transit Options Transit Tie-Down
Transport Bracket
Warranty Lifetime on Frame
Limited Lifetime on Components